Heating and Air Conditioning Repair Service Los Angeles

Air Conditioning Troubleshooting Tips Worth Considering Before Seeking Professional Aid

Air Conditioning Troubleshooting Tips Air Conditioning Troubleshooting Tips Worth Considering Before Seeking Professional Aid

Air conditioners failing to work are possible any time – the peak of summer is a common issue that a lot of people face. It is the worst kind of situation you will have to deal with and your first instinct in the panic will be to immediately call a repairman to resolve the issue. This may cost you quite a bit and it may not even be really required. Some air conditioning troubleshooting techniques can be adopted to fix minor problems yourself before taking professional aid. Following are some troubleshooting tips that can be of great help and your source of hope in that deadly situation.

1. Check breaker panel
Start troubleshooting with checking for a tripped breaker or a blown fuse in your breaker panel. This would cut the power supply to your air conditioning unit, disallowing it to function at all. All you need to do is to simply flip back the breaker into the ON position.

2. Check the controller
There are different heating and cooling settings in every HVAC system and any incorrect use of the controller could result in the system not performing as it should. Sometimes it becomes an issue even if the thermostat is set too high and lowering its setting can be of good help. If you are finding it hard to get the right setting, you can refer to the operation manual or contact the contractor who sold and installed the device for you and ask him for advice. You can also always look up the internet for a few handy tips to troubleshoot this issue.

3. Check the filters
This is one of the air conditioning troubleshooting tips that fixes the issue right away.
The most common problem in air conditioning systems is that the filters get jammed with dust owing to lack of cleaning. Cleaning is an essential element of maintenance and it should be done once in every 3-4 months.

4. Examine the compressor
The compressor can produce issues if it gets blocked due to dirt. Remove the blockage and clean the fins and coils. All debris should be removed and any grass or weeds growing should be cut down. If this doesn’t make your air conditioning unit work normally, check if there are any irregular sounds coming from the compressor. Check the compressor to see if there is any ice build-up. Any of these issues demands professional help.

5. Reset power
Sometimes, a simple air conditioning troubleshooting technique like resetting the power can make the system get back to work just like the case with computers. All that is needed is stopping the power supply by turning off the unit in the meter box. Keep the switches turned off for a while and then turn them back on. This simple tip works in many cases.
While trying these troubleshooting tips, it is important to keep in mind not to exceed your skill level. Trying to fix something that is beyond your ability may worsen the problem. It is always advisable to seek professional help if the problem looks serious and long-lasting.

You can follow any responses to this entry through the RSS feed. You can leave a response, or trackback from your own site.

Related Posts

Leave a Reply